SL23EP09SI-1HT Overview
The Tape & Reel (TR) method is used for packaging clock ICs. Clock PLL is embedded in the 16-SOIC (0.154, 3.90mm Width) package. Under reflowing process, this clock generator ic is able to sustain a maximum temperature of NOT SPECIFIED. There are 16 terminations found in the file. To operate this time clock generator, 2.5V voltage should be applied. In this case, Clock is designed to be the input of the clock generator. 1 circuits are implemented to access the electronic component's full performance. A clock-based RF synthesizer that provides a max frequency of 220MHz is available. Because of the Surface Mount, clock PLL can be easily mounted on the panel. Approximately 2.7V is the maximum supply voltage needed by this time clock generator. For safety reasons, this frequency synthesizer should have a voltage supply above 2.3V. There are 2.3V~3.6V available for use with this clock PLL. Statistics suggest that the ambient temperature be set at -40°C~85°C, which is what is estimated by the test. There are several logic levels in LVCMOS logic that can be used with this clock generator. Microprocessor-specific clock PLL with 16 bits. According to the base part number, its related parts can be founded. PF synthesizers is equipped with 16 pins. The frequency generator has a ALSO OPERATES WITH 3.3V SUPPLY feature to improve the output of clock signals.
SL23EP09SI-1HT Features
Available in the 16-SOIC (0.154, 3.90mm Width)
Supply voltage of 2.5V
SL23EP09SI-1HT Applications
There are a lot of Silicon Labs SL23EP09SI-1HT Clock Generators applications.
- Communication infrastructure
- Peripheral devices
- Tracking filters
- Pagers
- Digital circuits
- Local oscillator source in receiver
- Clock recovery
- Signal generator
- Telecommunication systems
- Signal demodulation
