SL23EP05BSI-1HT Overview
Tape & Reel (TR)-method packaging is used for clock ICs. It contains 8 terminations that can be found in frequency synthesizer. This electronic frequency generator requires a voltage of 2.5V. This clock generator would require a maximum supply voltage of 2.7V. For safety reasons, this frequency synthesizer should have a voltage supply above 2.3V. As soon as the PLL's operating temperature exceeds 85°C, it may cause ha85°Cards. If the ambient temperature is below -40°C, the clock PLL may not start up. This clock PLL features ALSO OPERATES AT 3.3V SUPPLY for better clock signal output. At 0.1 ns Max, this clock generator offers low timing skew. 4 high true output enable pins are available on this clock generator. When searching for parts of the SL23 family, similar frequency generators will be found. Logic circuits based on PLL BASED CLOCK DRIVER logic use this electronic frequency generator. STANDARD input conditioning makes physical input clock PLLs into control signals.
SL23EP05BSI-1HT Features
Supply voltage of 2.5V
4 true outputs
SL23EP05BSI-1HT Applications
There are a lot of Silicon Labs
SL23EP05BSI-1HT Clock Generators applications.
- Automatic test equipment
- Wide area power system
- Digital circuits
- Wireless base station for LTE, LTE-advanced
- Picocells, femtocells and small cells
- Sampling clocks for ADC and DAC
- 1 Gigabit Ethernet
- 10 Gigabit Ethernet
- FPGA and processor clocks
- Line cards used in telephone exchange
