SL23EP04SC-1T Overview
Tape & Reel (TR)-method packaging is used for clock ICs. The 8-SOIC (0.154, 3.90mm Width) package contains this clock generator. This clock generator ic can sustain a maximum temperature of NOT SPECIFIED during reflowing. It contains 8 terminations that can be found in frequency synthesizer. This electronic frequency generator requires a voltage of 2.5V. The input of this clock generator is designed to be Clock. To access the full performance of the electronic component, 1 circuits are implemented. There is a maximum frequency of 220MHz Max with this clock-based frequency generator. Thanks to the Surface Mount, this electric component can be conveniently installed on the panel. This clock generator would require a maximum supply voltage of 2.75V. For safety reasons, this frequency synthesizer should have a voltage supply above 2.25V. As far as the supply voltage is concerned, clock PLL can be used with 2.97V~3.63V. Based on the test statistics, an ambient temperature of 0°C~70°C should be set. As the name suggests, this is a clock generator that is compatible with LVCMOS logic levels. The clock-generating IC is a 8-bit device designed specifically for microprocessors. You can find related electrical components to the base part number SL23EP04. It is possible to connect to the PLL via 8 pins. This clock PLL features ALSO OPERATES WITH 3.3V SUPPLY for better clock signal output. At 0.25 ns Max, this clock generator offers low timing skew.
SL23EP04SC-1T Features
Available in the 8-SOIC (0.154, 3.90mm Width)
Supply voltage of 2.5V
SL23EP04SC-1T Applications
There are a lot of Silicon Labs
SL23EP04SC-1T Clock Generators applications.
- Automatic test equipment
- Wide area power system
- Digital circuits
- Wireless base station for LTE, LTE-advanced
- Picocells, femtocells and small cells
- Sampling clocks for ADC and DAC
- 1 Gigabit Ethernet
- 10 Gigabit Ethernet
- FPGA and processor clocks
- Line cards used in telephone exchange
