SI5350B-A-GU Overview
The Tube method is used for packaging clock ICs. This clock generator is embedded in the 24-SSOP (0.154, 3.90mm Width) package. As a result, frequency synthesizers can be found to contain 24 terminations. Basically, a voltage of 2.5V should be applied to this electronic frequency generator. This Clock PLL will be fed by Crystal as its input. It is possible to access the full performance of the electrical part by implementing 1 circuits. This clock-based frequency generator provides a frequency up to 160MHz Max. This component can be conveniently installed on the panel thanks to the Surface Mount. There are 2.25V~3.63V available for use with this clock PLL. The ambient temperature should be set at -40°C~85°C, which is estimated by the test statistics. The RF synthesizer is compatible with LVCMOS logic levels. Clock Generator is the type of electrical part that this component is classified as. In this IC, a 24-bit frequency generator is designed specifically for use in microprocessors. It is possible to find its related electronic parts by searching for the base part number SI5350. It is possible to connect to the PLL via 24 pins. The supply voltage should be maintained at 3.3V for high efficiency. The RF synthesizer features CAN ALSO OPERATE AT 3.3V SUPPLY for improved clock signal output. MultiSynth? series electronic parts are used in this part. The output frequency is magnified as high as possible with 8 signal outputs. This time clock generator requires a supply current of 25mA in order to operate properly.
SI5350B-A-GU Features
Available in the 24-SSOP (0.154, 3.90mm Width)
Supply voltage of 2.5V
Operating supply voltage of 3.3V
SI5350B-A-GU Applications
There are a lot of Silicon Labs SI5350B-A-GU Clock Generators applications.
- Space communucation
- Signal modulation and demodulation
- Myriad digital applications
- Jitter reduction
- Frequency synthesis
- Pagers
- Bluetooth receivers
- Coherent carrier tracking
- Quenching?
- Medical equipment
