SI5350A-B07402-GMR Overview
Tape & Reel (TR)-method packaging is used for clock ICs. As part of the 20-VFQFN Exposed Pad package, this clock generator is embedded. 20 terminations can be found in frequency synthesizer. This clock generator ic should receive a voltage of 1.8V. Thanks to the Surface Mount, this electric component can be conveniently installed on the panel. Clock PLL is capable of receiving a maximum of 1.89V as a supply voltage. The number of uPs/uCs/Peripheral IC this time clock generator incorporates is CLOCK GENERATOR, PROCESSOR SPECIFIC. For safety reasons, this frequency synthesizer should have a voltage supply above 1.71V. Overheating of the frequency generators may cause dangers once it is set to more than 85°C. For the clock, clock generator's output frequency should not exceed 200MHz. If the ambient temperature is below -40°C, the clock PLL may not start up. The frequency generator has a ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY feature to improve the output of clock signals.
SI5350A-B07402-GMR Features
Available in the 20-VFQFN Exposed Pad
Supply voltage of 1.8V
Output clock frequency (Max) of 200MHz
SI5350A-B07402-GMR Applications
There are a lot of Silicon Labs SI5350A-B07402-GMR Clock Generators applications.
- Frequency shifting decodes
- Frequency Modulation (FM) stereo decoders
- Electronic countermeasures
- Precision auxiliary angle deflection measurement
- High-speed optical transport network (OTN)
- Reference signals to RF systems
- Frequency synthesis
- Wi-Fi routers
- Carrier synchronization in wired communication
- Signal demodulation
