SI5350A-B06401-GTR Overview
Clock ICs are packaged using the Tape & Reel (TR) method. Clock PLL is embedded in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package. As a result, frequency synthesizers can be found to contain 10 terminations. Clock generator ics require a voltage of 1.8V. A Surface Mount-shaped electrical component makes it convenient to mount on a panel. The maximal supply voltage this clock generator would take is 1.89V. This RF synthesizer has CLOCK GENERATOR, PROCESSOR SPECIFIC uPs, uCs, and peripheral ICs. For safety reasons, this frequency generator's supply voltage should remain above 1.71V. In addition, the PLL may cause ha85°Cards once the temperature is set higher than 85°C. With this clock-generator, you can generate a high-quality clock output frequency of 200MHz. If the ambient temperature is below -40°C, the clock PLL may not start up. ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY is included in this frequency generator to enhance clock signal output.
SI5350A-B06401-GTR Features
Available in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Supply voltage of 1.8V
Output clock frequency (Max) of 200MHz
SI5350A-B06401-GTR Applications
There are a lot of Silicon Labs SI5350A-B06401-GTR Clock Generators applications.
- FMCW Radar
- High-speed communication applications
- Pulsed digital systems
- Closed circuit systems
- Mobile telephones
- Wide area power system
- Skew suppression
- Frequency synthesis
- Frequency Modulation (FM) stereo decoders
- Pagers
