SI5350A-B06386-GT Overview
Clock generator is packaged in the way of Tube. In the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package, there is an embedded clock generator. As you can see, it consists of 10 terminations. The clock generator ic should be grounded with a voltage of 1.8V. Thanks to the Surface Mount, this electric component can be conveniently installed on the panel. There is a maximum voltage of 1.89V for this clock generator. The number of uPs/uCs/PEripheral ICs contained in this clock generator is CLOCK GENERATOR, PROCESSOR SPECIFIC. It is safe to use this frequency synthesizer with a supply voltage above 1.71V. Whenever the operating temperature for the PLL exceeds 85°C, it may become ha85°Cardous. Synthesi200MHzing a clock output frequency of 200MHz is possible with this clock-generator. The operating temperature should be kept above -40°C. For better clock signal output, this clock PLL is featured with ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY.
SI5350A-B06386-GT Features
Available in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Supply voltage of 1.8V
Output clock frequency (Max) of 200MHz
SI5350A-B06386-GT Applications
There are a lot of Silicon Labs SI5350A-B06386-GT Clock Generators applications.
- Set-top boxes
- FM demodulation networks for FM operations
- Symbol synchronization
- Clock recovery
- Electronic equipment
- Radar
- Local oscillator source in receiver
- Wi-Fi routers
- Computers to manage memory cards
- VSAT (Small Ground Satellite Station)
