SI5350A-B06299-GMR Overview
As a clock IC, it uses the Tape & Reel (TR) package. There is a clock generator embedded in the 20-VFQFN Exposed Pad package. It contains a total of 20 terminations within RF synthesizer. The clock generator ic should be grounded with a voltage of 1.8V. Thanks to the Surface Mount, this electric component can easily be installed on a panel. Clock PLL is capable of receiving a maximum of 1.89V as a supply voltage. RF synthesizer incorporates CLOCK GENERATOR, PROCESSOR SPECIFIC UPUs, PCs, and peripheral IC's. A maximum voltage of 1.71V should be used for this frequency generator for safety reasons. A frequency generator that runs over 85°C may cause ha85°Cards. A clock generating device that produces high-quality clock output frequencies of 200MHz is available for sale. It is possible that this clock PLL will not start if the ambient temperature is less than -40°C. ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY is included in this frequency generator to enhance clock signal output.
SI5350A-B06299-GMR Features
Available in the 20-VFQFN Exposed Pad
Supply voltage of 1.8V
Output clock frequency (Max) of 200MHz
SI5350A-B06299-GMR Applications
There are a lot of Silicon Labs SI5350A-B06299-GMR Clock Generators applications.
- Reference signals to RF systems
- Cellular/4G
- Vector network analyzers (VNA)
- Antenna automatic tracking
- CB radios
- Local oscillators (LOs)
- Peripheral devices
- Test equipment
- High-speed communication applications
- Coherent detection of the signal
