SI5350A-B06233-GT Overview
The Tube method is used for packaging clock ICs. 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) contains this Clock PLL. As you can see, it consists of 10 terminations. This electronic frequency generator requires a voltage of 1.8V. With the Surface Mount, it is easy to install this electric component on the panel. This clock generator would require a maximum supply voltage of 1.89V. Incorporating CLOCK GENERATOR, PROCESSOR SPECIFIC uPs/uCs/Peripheral ICs, this RF synthesizer features CLOCK GENERATOR, PROCESSOR SPECIFIC. This frequency synthesizer requires a supply voltage above 1.71V to be safe. After the operating temperature of the frequency generators reaches 85°C, it may cause ha85°Cards. With this clock-generating device, a high-quality clock output frequency of 200MHz can be produced. The operating temperature should be kept above -40°C. ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY is included in this frequency generator to enhance clock signal output.
SI5350A-B06233-GT Features
Available in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Supply voltage of 1.8V
Output clock frequency (Max) of 200MHz
SI5350A-B06233-GT Applications
There are a lot of Silicon Labs SI5350A-B06233-GT Clock Generators applications.
- Microwave backhaul IF
- Cell phones
- Signal generator
- Phase modulation cellular systems
- Digital HDTV systems
- Melting
- Digital logic circuits
- Frequency Modulation (FM) stereo decoders
- Microprocessor clock multipliers
- Automatic test equipment
