SI5345A-D08295-GMR Overview
The Tape & Reel (TR) method is used for packaging clock ICs. This clock generator ic can sustain 260 degrees of temperature during reflowing. It contains 64 terminations that can be found in frequency synthesizer. This electronic frequency generator requires a voltage of 1.8V. It would take a maximum supply voltage of 1.89V to operate this time clock generator. RF synthesizer incorporates CLOCK GENERATOR, PROCESSOR SPECIFIC UPUs, PCs, and peripheral IC's. It is safe to use this frequency synthesizer with a supply voltage above 1.71V. In addition, the PLL may cause ha85°Cards once the temperature is set higher than 85°C. With this clock-generating device, a high-quality clock output frequency of 1028MHz can be produced. It is possible that this clock PLL will not start if the ambient temperature is less than -40°C.
SI5345A-D08295-GMR Features
Supply voltage of 1.8V
Output clock frequency (Max) of 1028MHz
SI5345A-D08295-GMR Applications
There are a lot of Silicon Labs SI5345A-D08295-GMR Clock Generators applications.
- Ports
- Wide area power system
- Digital logic circuits
- Carrier synchronization in wired communication
- FPGA and processor clocks
- Main oscillator in receiver
- Bluetooth receivers
- Coherent carrier tracking
- Test equipment
- Radar
