SI5335D-B08169-GMR Overview
Clock generator is packaged in the way of Tape & Reel (TR). The 24-VFQFN Exposed Pad package contains this clock generator. A maximum temperature of 260 can be sustained by this clock generator ic during reflowing. It contains 24 terminations that can be found in frequency synthesizer. A voltage of 1.8V should be applied to this electronic frequency generator. The Surface Mount allows this electrical component to be easily installed on the panel. This clock generator would require a maximum supply voltage of 1.98V. Incorporating CLOCK GENERATOR, PROCESSOR SPECIFIC uPs/uCs/Peripheral ICs, this RF synthesizer features CLOCK GENERATOR, PROCESSOR SPECIFIC. It is safe to use this frequency synthesizer with a supply voltage above 1.71V. After the operating temperature of the frequency generators reaches 85°C, it may cause ha85°Cards. The clock PLL can synthesi200MHze a clock frequency of 200MHz with high quality. If the ambient temperature is below -40°C, the frequency generator may not start. This clock PLL features ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY for better clock signal output.
SI5335D-B08169-GMR Features
Available in the 24-VFQFN Exposed Pad
Supply voltage of 1.8V
Output clock frequency (Max) of 200MHz
SI5335D-B08169-GMR Applications
There are a lot of Silicon Labs SI5335D-B08169-GMR Clock Generators applications.
- FMCW Radar
- Local oscillator source in receiver
- Myriad digital applications
- Wireless base station for LTE, LTE-advanced
- Telecommunication systems
- Automatic control
- 1 Gigabit Ethernet
- Bluetooth transmitters
- Wide area power system
- Carrier synchronization in wired communication
