SI5335D-B08132-GMR Overview
Clock generator is packaged in the way of Tape & Reel (TR). In the 24-VFQFN Exposed Pad package, there is an embedded clock generator. This clock generator ic can sustain 260 degrees of temperature during reflowing. 24 terminations can be found in frequency generators. A voltage of 1.8V should be applied to this electronic frequency generator. With the Surface Mount, it is easy to install this electric component on the panel. This clock generator would require a maximum supply voltage of 1.98V. This time clock generator integrates CLOCK GENERATOR, PROCESSOR SPECIFIC uPs, uCs, and peripheral ICs. A maximum voltage of 1.71V should be used for this frequency generator for safety reasons. Overheating of the frequency generators may cause dangers once it is set to more than 85°C. With this clock-generating device, 200MHz of high-quality clock output frequency can be generated. It is possible that this clock PLL will not start if the ambient temperature is less than -40°C. For better clock signal output, this clock PLL is featured with ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY.
SI5335D-B08132-GMR Features
Available in the 24-VFQFN Exposed Pad
Supply voltage of 1.8V
Output clock frequency (Max) of 200MHz
SI5335D-B08132-GMR Applications
There are a lot of Silicon Labs SI5335D-B08132-GMR Clock Generators applications.
- FSK demodulators
- Pagers
- Media broadcast servers
- Digital logic circuits
- Time to digital converters
- Precision auxiliary angle deflection measurement
- Wide area power system
- Peripheral devices
- Jitter reduction
- Mobile telephones
