SI5335D-B08043-GMR Overview
Tape & Reel (TR)-method packaging is used for clock ICs. Clock PLL is embedded in the 24-VFQFN Exposed Pad package. When reflowed, this frequency generator can withstand a maximum temperature of 260. It contains a total of 24 terminations within RF synthesizer. Basically, a voltage of 1.8V should be applied to this electronic frequency generator. With the Surface Mount, it is easy to install this electric component on the panel. Clock generators can take up to 1.98V of power as a maximum supply voltageThis time clock generator integrates CLOCK GENERATOR, PROCESSOR SPECIFIC uPs, uCs, and peripheral ICs. The supply voltage for this frequency synthesizer should be kept above 1.71V for safety considerations. It may cause ha85°Cards once the operating temperature for the device is set in excess of 85°C. With this clock-generator, you can generate a high-quality clock output frequency of 200MHz. An ambient temperature below -40°C may cause this frequency generator to malfunction. For better clock signal output, this clock PLL is featured with ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY.
SI5335D-B08043-GMR Features
Available in the 24-VFQFN Exposed Pad
Supply voltage of 1.8V
Output clock frequency (Max) of 200MHz
SI5335D-B08043-GMR Applications
There are a lot of Silicon Labs SI5335D-B08043-GMR Clock Generators applications.
- CB radios
- MRI
- VSAT (Small Ground Satellite Station)
- High-speed optical transport network (OTN)
- GPS systems
- Phase modulation cellular systems
- Precision auxiliary angle deflection measurement
- Frequency shifting decodes
- Local oscillators (LOs)
- Microwave radio
