SI5335D-B07482-GMR Overview
Clock ICs are packaged using the Tape & Reel (TR) method. In the 24-VFQFN Exposed Pad package, there is an embedded clock generator. This clock generator will sustain a maximum temperature of 260 when reflown. It contains a total of 24 terminations within RF synthesizer. For this clock generator ic, a voltage of 1.8V is required. Thanks to the Surface Mount, this electric component can easily be installed on a panel. Clock PLL is capable of receiving a maximum of 1.98V as a supply voltage. RF synthesizer is comprised of CLOCK GENERATOR, PROCESSOR SPECIFIC uPs, uCs, and peripheral ICs. It is safe to use this frequency synthesizer with a supply voltage above 1.71V. In addition, the PLL may cause ha85°Cards once the temperature is set higher than 85°C. With this clock-generating device, a high-quality clock output frequency of 200MHz can be produced. A temperature of less than -40°C may cause this clock PLL to fail to start. For better clock signal output, this clock PLL is featured with ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY.
SI5335D-B07482-GMR Features
Available in the 24-VFQFN Exposed Pad
Supply voltage of 1.8V
Output clock frequency (Max) of 200MHz
SI5335D-B07482-GMR Applications
There are a lot of Silicon Labs SI5335D-B07482-GMR Clock Generators applications.
- Electronic countermeasures
- Automatic test equipment
- Mechanical devices
- FPGA and processor clocks
- Cellular/4G
- Bit synchronization
- Cell phones
- Microwave radio
- FSK demodulators
- Satellite navigation communication
