SI5335D-B06171-GMR Overview
Clock ICs are packaged using the Tape & Reel (TR) method. A Clock PLL is included with the 24-VFQFN Exposed Pad package. The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible. There are 24 terminations found in this file. This clock generator ic should receive a voltage of 1.8V. Due to the Surface Mount-shape, this electronic component can be conveniently installed on the panel. There is a maximum voltage of 1.98V for this clock generator. The number of uPs/uCs/PEripheral ICs contained in this clock generator is CLOCK GENERATOR, PROCESSOR SPECIFIC. Keeping the supply voltage for this frequency synthesizer above 1.71V is recommended for safety reasons. After the operating temperature of the frequency generators reaches 85°C, it may cause ha85°Cards. Synthesi200MHzing a clock output frequency of 200MHz is possible with this clock-generator. Unless the ambient temperature is greater than -40°C, this clock PLL may not start. A frequency synthesizer with ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY features better clock signal output.
SI5335D-B06171-GMR Features
Available in the 24-VFQFN Exposed Pad
Supply voltage of 1.8V
Output clock frequency (Max) of 200MHz
SI5335D-B06171-GMR Applications
There are a lot of Silicon Labs SI5335D-B06171-GMR Clock Generators applications.
- Picocells, femtocells and small cells
- Digital logic circuits
- FSK demodulators
- Signal modulation and demodulation
- Carrier synchronization in wired communication
- Signal frequency synthesis circuits
- Integrated phase noise in aerospace systems
- Wireless base station for LTE, LTE-advanced
- Digital HDTV systems
- Motor speed controls
