SI5335D-B03442-GMR Overview
In order to package it as a clock IC, the Tape & Reel (TR) package is used. The 24-VFQFN Exposed Pad package embeds this Clock PLL. This clock generator ic can sustain 260 degrees of temperature during reflowing. 24 terminations can be found in frequency synthesizer. This electronic frequency generator requires a voltage of 1.8V. Thanks to the Surface Mount, this electric component can be conveniently installed on the panel. This clock generator would require a maximum supply voltage of 1.98V. The uPs/uCs/Peripheral IC clock generator incoporates is CLOCK GENERATOR, PROCESSOR SPECIFIC. Keeping the supply voltage for this frequency synthesizer above 1.71V is recommended for safety reasons. The operating temperature should be kept below 85°C. With this clock-generator, you can generate a high-quality clock output frequency of 200MHz. In temperatures lower than -40°C, this frequency generator may not start. In order to provide better clock signal output, this frequency synthesizer is equipped with ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY.
SI5335D-B03442-GMR Features
Available in the 24-VFQFN Exposed Pad
Supply voltage of 1.8V
Output clock frequency (Max) of 200MHz
SI5335D-B03442-GMR Applications
There are a lot of Silicon Labs SI5335D-B03442-GMR Clock Generators applications.
- CPUs
- Infotainment systems
- FSK demodulators
- Small signal recovery
- Skew suppression
- Test equipment
- Microwave point-to-point systems
- Deep space exploration
- Frequency Modulation (FM) stereo decoders
- Telecommunication systems
