SI5335C-B07075-GMR Overview
As a clock IC, PLLs is packaged using the Tape & Reel (TR) method. 24-VFQFN Exposed Pad contains this Clock PLL. When reflowed, this frequency generator can withstand a maximum temperature of 260. It contains a total of 24 terminations within RF synthesizer. Clock generator ics require a voltage of 1.8V. Because of the Surface Mount, clock PLL can be easily mounted on the panel. There is a maximum voltage of 1.98V for this clock generator. This time clock generator integrates CLOCK GENERATOR, PROCESSOR SPECIFIC uPs, uCs, and peripheral ICs. Keeping the supply voltage for this frequency synthesizer above 1.71V is recommended for safety reasons. In addition, the PLL may cause ha85°Cards once the temperature is set higher than 85°C. Synthesi350MHzing a clock output frequency of 350MHz is possible with this clock-generator. It is possible that this clock PLL will not start if the ambient temperature is less than -40°C. The RF synthesizer features ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY for improved clock signal output.
SI5335C-B07075-GMR Features
Available in the 24-VFQFN Exposed Pad
Supply voltage of 1.8V
Output clock frequency (Max) of 350MHz
SI5335C-B07075-GMR Applications
There are a lot of Silicon Labs SI5335C-B07075-GMR Clock Generators applications.
- Local oscillator source in receiver
- Wide area power system
- High-frequency induction heating
- Signal frequency synthesis circuits
- Mixed mode (analog and digital) applications
- Automatic test equipment
- Electronic equipment
- Wireless base station for LTE, LTE-advanced
- Computers to manage memory cards
- Signal generator
