SI5335C-B06484-GMR Overview
Clock ICs are packaged using the Tape & Reel (TR) method. There is a clock generator embedded in the 24-VFQFN Exposed Pad package. This clock generator ic can sustain 260 degrees of temperature during reflowing. There are 24 terminations found in the file. This electronic frequency generator requires a voltage of 1.8V. This component can be conveniently installed on the panel thanks to the Surface Mount. Clock PLL is capable of receiving a maximum of 1.98V as a supply voltage. The number of uPs/uCs/Peripheral IC this time clock generator incorporates is CLOCK GENERATOR, PROCESSOR SPECIFIC. Keeping the supply voltage for this frequency synthesizer above 1.71V is recommended for safety reasons. In addition, the PLL may cause ha85°Cards once the temperature is set higher than 85°C. With this clock-generating device, a high-quality clock output frequency of 350MHz can be produced. A temperature of less than -40°C may cause this clock PLL to fail to start. The frequency generator has a ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY feature to improve the output of clock signals.
SI5335C-B06484-GMR Features
Available in the 24-VFQFN Exposed Pad
Supply voltage of 1.8V
Output clock frequency (Max) of 350MHz
SI5335C-B06484-GMR Applications
There are a lot of Silicon Labs SI5335C-B06484-GMR Clock Generators applications.
- Microprocessor clock multipliers
- Ultrasound diagnosis
- Signal frequency synthesis circuits
- Motor speed controls
- Microwave backhaul IF
- Cable television converter boxes
- Antenna automatic tracking
- Automatic control
- Jitter reduction
- MRI
