SI5335C-B05995-GMR Overview
As a clock IC, it uses the Tape & Reel (TR) package. In the 24-VFQFN Exposed Pad package, there is an embedded clock generator. A maximum temperature of 260 can be sustained by this clock generator ic during reflowing. There are 24 terminations found in this file. A voltage of 1.8V should be applied to this electronic frequency generator. Because of the Surface Mount, clock PLL can be easily mounted on the panel. This clock generator would require a maximum supply voltage of 1.98V. The number of uPs/uCs/PEripheral ICs contained in this clock generator is CLOCK GENERATOR, PROCESSOR SPECIFIC. A maximum voltage of 1.71V should be used for this frequency generator for safety reasons. A frequency generator that runs over 85°C may cause ha85°Cards. The clock PLL can synthesi350MHze a clock frequency of 350MHz with high quality. It is possible that this clock PLL will not start if the ambient temperature is less than -40°C. In order to provide better clock signal output, this frequency synthesizer is equipped with ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY.
SI5335C-B05995-GMR Features
Available in the 24-VFQFN Exposed Pad
Supply voltage of 1.8V
Output clock frequency (Max) of 350MHz
SI5335C-B05995-GMR Applications
There are a lot of Silicon Labs SI5335C-B05995-GMR Clock Generators applications.
- Coherent carrier tracking
- Cable television converter boxes
- 1 Gigabit Ethernet
- Phase modulation cellular systems
- Local oscillators (LOs)
- Melting
- Skew suppression
- Pagers
- GPS systems
- Smartphones
