SI5335C-B01912-GM Overview
As a clock IC, it uses the Tray package. A Clock PLL is included with the 24-VFQFN Exposed Pad package. Frequency generator can maintain a maximum temperature of 260 under reflowing conditions. As a result of this, we can find 24 terminations. To operate this time clock generator, 1.8V voltage should be applied. A Surface Mount-shaped electrical component makes it convenient to mount on a panel. Approximately 1.98V is the maximum supply voltage needed by this time clock generator. The digital clock generator incorporates CLOCK GENERATOR, PROCESSOR SPECIFIC uPs, uCs, and peripheral ICs. For safety reasons, this frequency synthesizer should have a voltage supply above 1.71V. It may cause ha85°Cards once the operating temperature for the device is set in excess of 85°C. Synthesi350MHzing a clock output frequency of 350MHz is possible with this clock-generator. If the ambient temperature is below -40°C, the clock PLL may not start up. A frequency synthesizer with ALSO OPERATES WITH 2.5V AND 3.3V NOMINAL SUPPLY features better clock signal output.
SI5335C-B01912-GM Features
Available in the 24-VFQFN Exposed Pad
Supply voltage of 1.8V
Output clock frequency (Max) of 350MHz
SI5335C-B01912-GM Applications
There are a lot of Silicon Labs SI5335C-B01912-GM Clock Generators applications.
- Time to digital converters
- Radar
- PCI express cards
- Space communucation
- Threshold extension
- Main oscillator in receiver
- Carrier synchronization in wired communication
- Digital circuits
- Small signal recovery
- Deep space exploration
