SI5335B-B02209-GMR Overview
Clock ICs are packaged using the Tape & Reel (TR) method. A Clock PLL is included with the 24-VFQFN Exposed Pad package. When reflowed, this frequency generator can withstand a maximum temperature of 260. 24 terminations can be found in frequency synthesizer. Basically, a voltage of 1.8V should be applied to this electronic frequency generator. The Surface Mount allows the electrical component to be installed conveniently on the panel. Clock PLL is capable of receiving a maximum of 1.98V as a supply voltage. RF synthesizer incorporates CLOCK GENERATOR, PROCESSOR SPECIFIC UPUs, PCs, and peripheral IC's. For safety reasons, this frequency synthesizer should have a voltage supply above 1.71V. In addition, the PLL may cause ha85°Cards once the temperature is set higher than 85°C. Clock PLL synthesi200MHzes a high-quality 200MHz clock output frequency. In temperatures lower than -40°C, this frequency generator may not start. This clock PLL features ALSO OPERATES WITH 2.5V AND 3.3V NOMINAL SUPPLY for better clock signal output.
SI5335B-B02209-GMR Features
Available in the 24-VFQFN Exposed Pad
Supply voltage of 1.8V
Output clock frequency (Max) of 200MHz
SI5335B-B02209-GMR Applications
There are a lot of Silicon Labs SI5335B-B02209-GMR Clock Generators applications.
- Automatic control system test
- Electronic countermeasures
- Main oscillator in receiver
- High-frequency induction heating
- Electronic equipment
- Closed circuit systems
- VSAT (Small Ground Satellite Station)
- Space communucation
- Motor speed controls
- Antenna automatic tracking
