SI5335A-B09084-GM Overview
Clock ICs are packaged using the Tray method. Embedded in the 24-VFQFN Exposed Pad package is this Clock PLL. This clock generator will sustain a maximum temperature of 260 when reflown. It contains a total of 24 terminations within RF synthesizer. The clock generator ic should be grounded with a voltage of 1.8V. With the Surface Mount, it is easy to install this electric component on the panel. It would be possible to supply this clock PLL with 1.98V of power. This RF synthesizer has CLOCK GENERATOR, PROCESSOR SPECIFIC uPs, uCs, and peripheral ICs. For safety reasons, this frequency generator's supply voltage should remain above 1.71V. After the operating temperature of the frequency generators reaches 85°C, it may cause ha85°Cards. The clock generator ic can synthesi350MHze a high-quality clock output frequency of 350MHz. An ambient temperature below -40°C may cause this frequency generator to malfunction. A frequency synthesizer with ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY features better clock signal output.
SI5335A-B09084-GM Features
Available in the 24-VFQFN Exposed Pad
Supply voltage of 1.8V
Output clock frequency (Max) of 350MHz
SI5335A-B09084-GM Applications
There are a lot of Silicon Labs SI5335A-B09084-GM Clock Generators applications.
- Mobile telephones
- Broadcast communication
- Signal demodulation
- Simple clock clean-up circuits
- MRI
- High-frequency induction heating
- Test and instrumentation equipment
- Set-top boxes
- FPGA and processor clocks
- Satellite receivers
