SI5335A-B08281-GMR Overview
In order to package it as a clock IC, the Tape & Reel (TR) package is used. There is a clock generator embedded in the 24-VFQFN Exposed Pad package. Under reflowing process, this clock generator ic is able to sustain a maximum temperature of 260. There are 24 terminations found in the file. This electronic frequency generator requires a voltage of 1.8V. The Surface Mount allows this electrical component to be easily installed on the panel. It would take a maximum supply voltage of 1.98V to operate this time clock generator. RF synthesizer incorporates CLOCK GENERATOR, PROCESSOR SPECIFIC UPUs, PCs, and peripheral IC's. For safety reasons, this frequency generator's supply voltage should remain above 1.71V. The operating temperature should be kept below 85°C. With this clock-generating device, a high-quality clock output frequency of 350MHz can be produced. Unless the ambient temperature is greater than -40°C, this clock PLL may not start. A frequency synthesizer with ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY features better clock signal output.
SI5335A-B08281-GMR Features
Available in the 24-VFQFN Exposed Pad
Supply voltage of 1.8V
Output clock frequency (Max) of 350MHz
SI5335A-B08281-GMR Applications
There are a lot of Silicon Labs SI5335A-B08281-GMR Clock Generators applications.
- Microwave backhaul IF
- CPUs
- Wireless base station for LTE, LTE-advanced
- Clock synchronization
- Radio receivers
- Infotainment systems
- Wireless handsets
- Main oscillator in receiver
- High-speed communication applications
- Automatic test equipment
