SI5335A-B07605-GM Overview
It is packaged using the Tray method since it is a clock IC. Clock PLL is embedded in the 24-VFQFN Exposed Pad package. Frequency generator is capable of operating at a maximum temperature of 260 when reflowing. There are 24 terminations found in this file. This time clock generator should be voltaged at 1.8V. The Surface Mount allows the electrical component to be installed conveniently on the panel. This clock generator would require a maximum supply voltage of 1.98V. The digital clock generator incorporates CLOCK GENERATOR, PROCESSOR SPECIFIC uPs, uCs, and peripheral ICs. Keeping the supply voltage for this frequency synthesizer above 1.71V is recommended for safety reasons. Whenever the frequency generators's operating temperature exceeds 85°C, ha85°Cards may occur. For the clock, clock generator's output frequency should not exceed 350MHz. A temperature of less than -40°C may cause this clock PLL to fail to start. This clock PLL features ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY for better clock signal output.
SI5335A-B07605-GM Features
Available in the 24-VFQFN Exposed Pad
Supply voltage of 1.8V
Output clock frequency (Max) of 350MHz
SI5335A-B07605-GM Applications
There are a lot of Silicon Labs SI5335A-B07605-GM Clock Generators applications.
- Signal frequency synthesis circuits
- Main oscillator in receiver
- Small signal recovery
- Media broadcast servers
- Bluetooth receivers
- Signal demodulation
- DVD recorders
- Time to digital converters
- Skew suppression
- Tracking filters
