SI5335A-B06363-GMR Overview
Clock ICs are packaged using the Tape & Reel (TR) method. In the 24-VFQFN Exposed Pad package, there is an embedded clock generator. Frequency generator is capable of operating at a maximum temperature of 260 when reflowing. As a result, frequency synthesizers can be found to contain 24 terminations. To operate this time clock generator, 1.8V voltage should be applied. Thanks to the Surface Mount, this electric component can easily be installed on a panel. The maximum voltage this clock PLL can handle is 1.98V. This RF synthesizer has CLOCK GENERATOR, PROCESSOR SPECIFIC uPs, uCs, and peripheral ICs. Safety considerations dictate that the supply voltage for this frequency synthesizer should be greater than 1.71V. It may cause ha85°Cards once the operating temperature for the device is set in excess of 85°C. The clock PLL can synthesi350MHze a clock frequency of 350MHz with high quality. If the ambient temperature is below -40°C, the clock PLL may not start up. There is a ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY feature on this frequency generator in order to produce a better clock signal.
SI5335A-B06363-GMR Features
Available in the 24-VFQFN Exposed Pad
Supply voltage of 1.8V
Output clock frequency (Max) of 350MHz
SI5335A-B06363-GMR Applications
There are a lot of Silicon Labs SI5335A-B06363-GMR Clock Generators applications.
- Broadcast communication
- Ultrasound diagnosis
- Simple clock clean-up circuits
- Motor speed controls
- Electronic countermeasures
- Aerospace and defense
- Bluetooth transmitters
- High-frequency induction heating
- Sampling clocks for ADC and DAC
- Signal analyzer
