SI5335A-B05532-GMR Overview
Tape & Reel (TR)-method packaging is used for clock ICs. A Clock PLL is included with the 24-VFQFN Exposed Pad package. The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible. As a result, frequency synthesizers can be found to contain 24 terminations. Basically, a voltage of 1.8V should be applied to this electronic frequency generator. This component can be conveniently installed on the panel thanks to the Surface Mount. It would be possible to supply this clock PLL with 1.98V of power. RF synthesizer is comprised of CLOCK GENERATOR, PROCESSOR SPECIFIC uPs, uCs, and peripheral ICs. For safety reasons, this frequency generator's supply voltage should remain above 1.71V. It may cause ha85°Cards once the operating temperature for the device is set in excess of 85°C. With this clock-generating device, a high-quality clock output frequency of 350MHz can be produced. In temperatures lower than -40°C, this frequency generator may not start. For better clock signal output, this clock PLL is featured with ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY.
SI5335A-B05532-GMR Features
Available in the 24-VFQFN Exposed Pad
Supply voltage of 1.8V
Output clock frequency (Max) of 350MHz
SI5335A-B05532-GMR Applications
There are a lot of Silicon Labs SI5335A-B05532-GMR Clock Generators applications.
- Antenna automatic tracking
- Set-top boxes
- Microwave backhaul IF
- Wi-Fi routers
- FPGA and processor clocks
- Wireless infrastructure
- Infotainment systems
- Closed circuit systems
- Digital circuits
- Digital logic circuits
