SI5335A-B02419-GM Overview
The Tray method is used for packaging clock ICs. Clock PLL is embedded in the 24-VFQFN Exposed Pad package. When reflowed, this frequency generator can withstand a maximum temperature of 260. There are 24 terminations found in the file. The clock generator ic should be grounded with a voltage of 1.8V. The Surface Mount allows the electrical component to be installed conveniently on the panel. Clock generators can take up to 1.98V of power as a maximum supply voltageIncorporating CLOCK GENERATOR, PROCESSOR SPECIFIC uPs/uCs/Peripheral ICs, this RF synthesizer features CLOCK GENERATOR, PROCESSOR SPECIFIC. There should be a voltage supply above 1.71V for this frequency generator in order to ensure its safety. A frequency generator that runs over 85°C may cause ha85°Cards. With this clock-generator, you can generate a high-quality clock output frequency of 350MHz. This frequency generator may fail to start up if the ambient temp is lower than -40°C. For better clock signal output, this clock PLL is featured with ALSO OPERATES WITH 2.5V AND 3.3V NOMINAL SUPPLY.
SI5335A-B02419-GM Features
Available in the 24-VFQFN Exposed Pad
Supply voltage of 1.8V
Output clock frequency (Max) of 350MHz
SI5335A-B02419-GM Applications
There are a lot of Silicon Labs SI5335A-B02419-GM Clock Generators applications.
- PMR (Professional Mobile Radio)
- Jitter reduction
- Automatic control system test
- Electronic countermeasures
- Mixed mode (analog and digital) applications
- Signal modulation and demodulation
- Bluetooth receivers
- Signal analyzer
- Ultrasound diagnosis
- Medical equipment
