SI51219-A01AFT Overview
Tube-method packaging is used for clock ICs. A Clock PLL is included with the 8-TSSOP (0.173, 4.40mm Width) package. This clock generator receives its inputs from Clock, Crystal, which is designed to be the clock source. A total of 1 circuits are implemented to access the full performance of the electrical part. Using this clock-based frequency synthesizer, you can achieve a maximum frequency of 200MHz. PLL clock is mounted in the way of Surface Mount. As long as there are 2.375V~3.63V supply voltages provided, clock generator ic should work. Test statistics estimate a temperature of 0°C~70°C, which should be set as the ambient temperature. LVCMOS is designed for clock generator's output. These related electrical parts are available for the base part number SI51219. There are 8 pins on the frequency generator that are available for use. RF synthesizers can handle voltages up to 3.3V. The output frequency is magnified as high as possible with 3 signal outputs.
SI51219-A01AFT Features
Available in the 8-TSSOP (0.173, 4.40mm Width)
Operating supply voltage of 3.3V
SI51219-A01AFT Applications
There are a lot of Silicon Labs SI51219-A01AFT Clock Generators applications.
- PCI express cards
- Media broadcast servers
- GPS systems
- Skew suppression
- Phase modulation cellular systems
- Telecommunication systems
- Signal modulation and demodulation
- Camera systems
- Carrier synchronization in wired communication
- HDD recorders
