BS100C Overview
These photodiodes are packaged in the Bulk to protect them from damage. The photodiodes are put into Side View packages for safety protection. In reverse-bias mode on a continual basis, the maximum amount of voltage the photodiodes can withstand is 10V. The voltage for the photodiodes should not exceed 10V in reverse-bias mode on a continual basis. The temperature should not be higher than 60°C when photodiodes operate. But the minimum operating temperature for the photodiodes should be set to -20°C. Even in the absence of light input, a photodiode occurs 3pA current.
BS100C Features
Moisture Sensitivity Level (MSL): 1 (Unlimited)
Operating Temperature: -20°C~60°C
Packaging: Bulk
Mount: Through Hole
Spectral Range: 500nm ~ 600nm
BS100C Applications
There are a lot of Sharp Microelectronics
BS100C Photodiodes applications.
- High speed photo detector
- Infrared remote control
- Infrared data transmission
- Photo interrupters
- Shaft encoders
- Electronic Equipment
- Industrial Automation
- Machine Controls
- Light Barriers
- Vision Controls
