BU7251SG-TR Overview
For convenience, it is packaged in SC-74A, SOT-753 .There is a Push-Pull output type for this comparator.Electronic comparator is shipped by Tape & Reel (TR) .The comparator has a total of 5 terminals.The electrical component here belongs to the Comparator family.With a 3V voltage supply, the comparator can perform multiple demanding tasks.The type of the chip can be classified as General Purpose .Electronic comparator consists of 1 elements in total.Electronic comparator has 5 pins.The recommended mounting method is Surface Mount .Electronic comparator is recommended that you set the operating temperature to -40°C~105°C in order to prevent malfunctions.The comparator has a pin count of 5 .You can find more pin-to-pin solutions by searching BU7251 .As a result, this comparator displays a quiescent current of 35μA .This component has a Surface Mount mount for mounting to PCBs or other boards.Normally, the nominal supply current should be 15μA when using the device.There is sufficient power to run the device from 3V power supplies.You can input a maximum current of 1pA into this device.Comparator electronics is clear from the voltage formula that the voltage gain of the part is 90dB .Comparator electronics is necessary to have an operating supply voltage of 2.75V for normal operation.
BU7251SG-TR Features
Push-Pull output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~105°C
Quiescent Current: 35μA
Voltage Gain: 90dB
BU7251SG-TR Applications
There are a lot of ROHM Semiconductor
BU7251SG-TR linear comparators applications.
- Lithium ion battery monitoring
- Battery management and protection
- Current and voltage sensing
- Analog front end
- Power management
- Point of load regulators
- DC/DC and AC/DC power supplies
- System control and monitoring
- Wearable Devices
- Mobile Phones and Tablets
