BU4936G-TR Overview
There are 5 terminals on this power management that allow it to be mounted. In terms of packaging, power management follows the Tape & Reel (TR) model. There are 1 functions included in this PMIC so that you can refer to them. It is possible to find on this power management a series of 1 channels. There are SC-74A, SOT-753 functions included in this PMIC so that you can refer to them. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. When a supply voltage of 2.4V is applied to the power ic, it conducts. When a supply voltage of 1 is applied to the power ic, it conducts. Surface Mount mounts IC management. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. It has a total of 5 pins that are attached to IC management. Pin count of the power management is 5. A voltage (Vsup) that doesn't fall below -300mV as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. This IC power should be powered by no more than 7V volts of supply voltage (Vsup). The recommended mounting type is Surface Mount. This range of temperature should be set for the supervisors: -40°C~125°C TA. Power management has an output of Push-Pull, Totem Pole during operation. You can always use BU49*, the base supervisor number, to search for similar PMICs of the manufacturer. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 1.58μA.
BU4936G-TR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of -300mV
BU4936G-TR Applications
There are a lot of ROHM Semiconductor BU4936G-TR Voltage Supervisors applications.
- Urban rail transit weak current power monitoring
- Important electronics for automotive safety
- Personal computers
- Smart meter
- Digitally controlled LDO regulators circuit
- Analog circuit
- Military electronics
- Kitchen appliances
- Leakage protection
- Display equipment
