BU4320G-TR Overview
As you can see, this power management is mounted through 5 terminals. There is a Tape & Reel (TR)-packaging method applied to IC management. As a reference, this IC management includes 1 functions for your convenience. On this supervisor, there is a series of 1 channels that can be found. The purpose of this IC power is to provide you with a reference of SC-74A, SOT-753 functions. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. When a supply voltage of 2.4V is applied to the power ic, it conducts. In a 1 supply voltage, the PMIC chip conducts. The power management is mounted by a Surface Mount-axis. Power Management Circuits is a subcategory of this PMIC chip. In total, it has 5 pins on IC management. Power managment ic pin count is 5. There should be a minimum voltage supply (Vsup) of 700mV for this PMIC. There should be no more than 7V volts of maximum supply voltage (Vsup) in this power management. A Surface Mount mounting type is recommended. You should set the supervisor's temperature during -40°C~125°C TA . The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. For this power management, there is an 550nA volt supply current. To find similar IC managements from the manufacturer, you can always search by BU43*. A maximum supply temperature of 1.75μA can be used.
BU4320G-TR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
550nA operating supply current
BU4320G-TR Applications
There are a lot of ROHM Semiconductor BU4320G-TR Voltage Supervisors applications.
- Household appliances
- Medical-specific insulation monitor
- Consumer electronics
- Electronics installed in the vehicle
- Electrical fire monitoring system
- Dash board
- Radar
- Stable power system
- Solar power charger
- Digitally controlled LDO regulators circuit
