BU4317G-TR Overview
A total of 5 terminals are used to mount this power management. Tape & Reel (TR)-packaging is used. As a reference, this IC management includes 1 functions for your convenience. Depending on the power managment ic you are looking at, you can find a total of 1 channels. In this PMIC, you can find SC-74A, SOT-753 functions for your reference. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. In a 2.4V supply voltage, the power management conducts. In a 1 supply voltage, the PMIC chip conducts. Surface Mount is the one that mounts power management. This power ic can be sub-categorized as Power Management Circuits. It has a total of 5 pins that are attached to IC management. 5 pins make up the power management. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 700mV. During this IC power, the maximum supply voltage (Vsup) should not exceed 7V volts. The recommended mounting type is Surface Mount. You should set the supervisor's temperature during -40°C~125°C TA . There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. A similar IC managements number of the manufacturer can always be found by using BU43*, the base power ics number. A maximum supply temperature of 1.75μA can be used.
BU4317G-TR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
BU4317G-TR Applications
There are a lot of ROHM Semiconductor BU4317G-TR Voltage Supervisors applications.
- Refrigeration
- Battery cars
- Utility meter
- Battery cars
- Medical-specific insulation monitor
- Detection of phase imbalance
- Network equipment
- Sensitive sensors
- Detection of phase sequence
- Important electronics for automotive protection
