MCP120-460I/SN Overview
This power management consists of 8 mounting terminals on which it can be mounted. A Tube package is used to package the power management. There are 1 functions included in this PMIC so that you can refer to them. A series of 1 channels can be found on this supervisor. Please refer to power management for 8-SOIC (0.154, 3.90mm Width) functions. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. Packages are specified to have an average peak reflow temperature of 260. In a 5V supply voltage, the power management conducts. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. The mount is attached to Surface Mount. It is possible to subcategorize this power ic as a Power Management Circuits chip. Taking into account all of the pins, this power management has a total of 8. This power management system has 8 pins. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1V. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. A Surface Mount mounting type is recommended. The supervisors should be set to the following temperature: -40°C~85°C TA. During normal operation, this power managment ic can generate Open Drain or Open Collector of output voltage. There is a supply current of 60μA for the power management. It is always advisable to use MCP120, the base supervisor number, when searching for similar PMICs from the manufacturer. The power management can work with a maximum supply temperature of 60μA.
MCP120-460I/SN Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current
MCP120-460I/SN Applications
There are a lot of Microchip Technology MCP120-460I/SN Voltage Supervisors applications.
- Battery-powered equipment
- Consumer electronics
- emergency room
- Set top box
- Precision measurement
- Sensitive sensors
- DC stabilized power supply module
- Medical-specific isolation transformer
- Analog circuit
- Detection of phase imbalance
