BU4245G-TR Overview
There are 5 terminals connected to this power management, which makes it easy to mount. It is packaged with Tape & Reel (TR). Power management is possible to find a series of 1 functions. Power management consists of 1 channels, each of which can be used independently. Please refer to power management for SC-74A, SOT-753 functions. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. IC management conducts at a voltage of 2.4V. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. Surface Mount is the one that mounts power management. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. In total, the power management has 5 pins in it. Power managment ic pin count is 5. There should be a minimum voltage supply (Vsup) of 700mV for this PMIC. Voltage (Vsup) shouldn't exceed 7V volts in this PMIC. Surface Mount mounting is recommended. The temperature of the supervisors should be set to this range: -40°C~125°C TA. As this power managment ic operates, it is able to produce an output voltage of Open Drain or Open Collector. There is a supply current of 550nA for the power management. You can always use BU42*, the base supervisor number, to search for similar PMICs of the manufacturer. A maximum supply temperature of 1.75μA can be used.
BU4245G-TR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
550nA operating supply current
BU4245G-TR Applications
There are a lot of ROHM Semiconductor BU4245G-TR Voltage Supervisors applications.
- Efficient information transmission
- Low voltage/high power - AI, GPU
- Automotive power systems
- External alarm
- Important electronics for automotive protection
- Battery-powered equipment
- Refrigeration
- Detection of phase sequence
- Fire equipment power monitoring system
- Multi-voltage system
