BU4213FVE-TR Overview
As you can see, this power management is mounted through 5 terminals. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. Please refer to this PMIC for 1 functions. A series of 1 channels can be found on this supervisor. In this PMIC, you can find SOT-665 functions for your reference. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. Manage ics operate at 2.4V supply voltages. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. Surface Mount mounts IC management. This power ic can be sub-categorized as Power Management Circuits. Taking into account all of the pins, this power management has a total of 5. This power management has 5 pins. Supply voltage (Vsup) should be at least 700mV for this power management. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 7V volts. The recommended mounting type for IC management is Surface Mount. The temperature of the supervisors should be set to this range: -40°C~125°C TA. During normal operation, this power managment ic can generate Open Drain or Open Collector of output voltage. It is always advisable to use BU42*, the base supervisor number, when searching for similar PMICs from the manufacturer. A maximum supply temperature of 1.75μA can be used.
BU4213FVE-TR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
BU4213FVE-TR Applications
There are a lot of ROHM Semiconductor BU4213FVE-TR Voltage Supervisors applications.
- emergency room
- Fire equipment power monitoring system
- Automotive permanent magnet synchronous motors
- Smartphones
- Leakage protection
- Medical-specific insulation monitor
- Military communications
- Leakage current detection
- Medical-specific isolation transformer
- Dash board
