MAX6747KA46/V+T Overview
Power management is mounted through 8 terminals. Packaging is in the form of a Tape & Reel (TR). Power management is possible to find a series of 1 functions. There are 1 channels available on this supervisor, and each channel has a different function. The purpose of this IC power is to provide you with a reference of SOT-23-8 functions. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. IC management is specified that the package peak reflow temperature should be NOT SPECIFIED. A supply voltage of 5V is used to conduct the PMIC chip. In a 1 supply voltage, the PMIC chip conducts. Surface Mount mounts power management on the wall. This power ic can be sub-categorized as Power Management Circuits. In total, the power management has 8 pins in it. Pin count of the power management is 8. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. A Surface Mount mounting type is recommended. We recommend setting the supervisors to -40°C~125°C TA degrees. While in operation, this supervisor has a voltage output of Open Drain or Open Collector. The power management's supply current is 5μA. A similar IC managements number of the manufacturer can always be found by using MAX6747, the base power ics number. As you may know, this PMIC comes from the well-known Automotive, AEC-Q100 series product line.
MAX6747KA46/V+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
5μA operating supply current
MAX6747KA46/V+T Applications
There are a lot of Maxim Integrated MAX6747KA46/V+T Voltage Supervisors applications.
- Detection of phase sequence
- Low voltage/high power - AI, GPU
- Important electronics for automotive protection
- Military electronics
- Unattended substation automation
- Satellite navigation
- Microcontroller system
- Telecommunications equipment
- Linux and server computing
- Electronics installed in the vehicle
