BU4211FVE-TR Overview
There are 5 terminals connected to this power management, which makes it easy to mount. Tape & Reel (TR)-packaging is used. To assist you, this IC power includes 1 functions. Depending on the power managment ic you are looking at, you can find a total of 1 channels. For your reference, this PMIC includes a list of SOT-665 functions. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. A supply voltage of 2.4V is used to conduct the PMIC chip. IC management conducts in a 1-voltage supply. Surface Mount mounts power management on the wall. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. A total of 5 pins are located on this power management. The pins of the power management system count 5. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 700mV. This IC power should be powered by no more than 7V volts of supply voltage (Vsup). Mounting type Surface Mount is recommended. It is recommended that the supervisor be set to this temperature: -40°C~125°C TA. As this power managment ic operates, it is able to produce an output voltage of Open Drain or Open Collector. If you want to search for similar IC managements of this manufacturer, you can always refer to BU42*, which is the base power ics number. The maximum supply temperature that PMIC chip can work with is 1.75μA.
BU4211FVE-TR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
BU4211FVE-TR Applications
There are a lot of ROHM Semiconductor BU4211FVE-TR Voltage Supervisors applications.
- FPGA design
- Precision measurement
- Network equipment
- Computer applications
- Stable power system
- Magnetic resonance imaging
- emergency room
- Insulation fault location system
- Electronics installed in the vehicle
- Functional modules
