Name: BU4052BCFV-E2
Brand: ROHM Semiconductor
SKU: BU4052BCFV-E2
Price: 1.67000 USD
Availability: InStock

new-10%

BU4052BCFV-E2

Manufacturer part number:BU4052BCFV-E2

Manufacturer:ROHM Semiconductor

Description:SP4T 160Ohm DUAL Analog Switches BU4052 16 Pins 300nA 5V 16-LSSOP (0.173, 4.40mm Width)

Case Package:SOT-23

Datasheet:BU4052BCFV-E2 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	7 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-LSSOP (0.173, 4.40mm Width)
Number of Pins	16
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Published	2008
JESD-609 Code	e2
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	160Ohm
Terminal Finish	TIN COPPER
Subcategory	Multiplexer or Switches
Max Power Dissipation	620mW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	10
Base Part Number	BU4052
Pin Count	16
Polarity	Non-Inverting
Power Supplies	5/15V
Number of Channels	4
Number of Circuits	2
Max Supply Voltage	18V
Min Supply Voltage	3V
Analog IC - Other Type	DIFFERENTIAL MULTIPLEXER
Operating Supply Current	15μA
Propagation Delay	15 ns
Turn On Delay Time	550 ns
Logic Function	Demultiplexer, Multiplexer
Number of Inputs	8
Supply Type	Single
Bandwidth	20MHz
Supply Current-Max (Isup)	0.015mA
Turn-Off Delay Time	550 ns
Max Dual Supply Voltage	9V
On-State Resistance (Max)	160Ohm
Min Dual Supply Voltage	1.5V
Multiplexer/Demultiplexer Circuit	4:1
Off-state Isolation-Nom	50 dB
Current - Leakage (IS(off)) (Max)	300nA
Channel Capacitance (CS(off), CD(off))	10pF
On-state Resistance Match-Nom	10Ohm
Switch Circuit	SP4T
Voltage - Supply, Single (V+)	3V~18V
Length	5mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

BU4052BCFV-E2 Product Details

BU4052BCFV-E2 Overview

This electronic part is conveniently packaged in 16-LSSOP (0.173, 4.40mm Width), making it easy to ship abroad. This packaging method provides high reliability because it uses advanced packaging techniques. There is an analog multiplexer mounted in position Surface Mount. Multiplexers and demultiplexers have a number of circuits 4:1. The operating temperature is extended to around -40°C~85°C TA. A total of 16 terminations have been recorded. As a result of its 4 channels, this electronic component provides high-quality output. An 5V voltage supply should allow the electrical part to be turned on and run. As part of its design, the 16 series is equipped with this electronic component. On the other hand, analog switches can be constructed using SP4T switching circuits. A 2 circuit is present in this switch device. Look for analog switch ic variants by searching with BU4052. It has an internal resistance of 160Ohm. You can find the functions of the 16 pins in the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. Users should never supply a voltage higher than 18V to a switch device. Single supply type digital switch with a low cost. The lowest voltage the electronic part should receive is 3V. 15μA current would be enough for this multiplexer to operate. Using a single voltage supply, this switch device consumes 3V~18V volts. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 9V. If you are using dual power supplies, you should attach at least 1.5V. There is an integrated analog IC DIFFERENTIAL MULTIPLEXER in the module. Operating the 8 inputs requires 8 inputs. In 20MHz-bandwidths, data can be transferred.