Name: CD74HCT4052M96
Brand: Texas Instruments
SKU: CD74HCT4052M96
Price: 0.63000 USD
Availability: InStock

new-10%

CD74HCT4052M96

Manufacturer part number:CD74HCT4052M96

Manufacturer:Texas Instruments

Description:SP4T 130Ohm Analog Switches BREAK-BEFORE-MAKE 74HCT4052 16 Pins 200nA 4.5V 16-SOIC (0.154, 3.90mm Width)

Case Package:SOT-23

Datasheet:CD74HCT4052M96 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	6 Weeks
Lifecycle Status	ACTIVE (Last Updated: 22 hours ago)
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Number of Pins	16
Weight	141.690917mg
Operating Temperature	-55°C~125°C TA
Packaging	Cut Tape (CT)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	130Ohm
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	4.5V
Base Part Number	74HCT4052
Pin Count	16
Operating Supply Voltage	5V
Polarity	Non-Inverting
Number of Channels	2
Number of Circuits	2
Max Supply Voltage	5.5V
Min Supply Voltage	4.5V
Analog IC - Other Type	DIFFERENTIAL MULTIPLEXER
Nominal Supply Current	16μA
Number of Bits	4
Propagation Delay	12 ns
Turn On Delay Time	70 ns
Logic Function	Demultiplexer, Multiplexer
Number of Inputs	8
Voltage - Supply, Single/Dual (±)	4.5V~5.5V ±1V~5V
Supply Type	Dual, Single
Bandwidth	185MHz
Neg Supply Voltage-Nom (Vsup)	-4.5V
Turn-Off Delay Time	50 ns
Max Dual Supply Voltage	5V
On-State Resistance (Max)	130Ohm
Min Dual Supply Voltage	1V
High Level Output Current	25mA
Dual Supply Voltage	3V
Low Level Output Current	25mA
Multiplexer/Demultiplexer Circuit	4:1
Off-state Isolation-Nom	65 dB
Current - Leakage (IS(off)) (Max)	200nA
Channel Capacitance (CS(off), CD(off))	5pF 12pF
On-state Resistance Match-Nom	5Ohm
Switch Circuit	SP4T
Channel-to-Channel Matching (ΔRon)	5 Ω
Switching	BREAK-BEFORE-MAKE
Drain to Source Resistance	130mOhm
Normal Position	NC
Height	1.75mm
Length	9.9mm
Width	3.91mm
Thickness	1.58mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

CD74HCT4052M96 Product Details

CD74HCT4052M96 Overview

The electronic component is convenient to ship overseas because it is packed in a 16-SOIC (0.154, 3.90mm Width). High reliability is achieved by using advanced packaging method Cut Tape (CT). In Surface Mount, you'll find this switch device. The ratio between the number of multiplexer and demultiplexer circuits is 4:1. Temperatures around -55°C~125°C TA are extended for operation. There are 16 terminations totally. A 2 channel electronic part produces high-quality output. An 4.5V voltage supply should allow the electrical part to be turned on and run. The electronic part body is injected with 16 pins. A SP4T switching circuit is used for these analog switches. A 2 circuit is present in this switch device. If you are looking for variants of the digital switch, trying search with 74HCT4052. As far as internal resistance is concerned, it has 130Ohm. Datasheets for functions of 16 pins are available. It is a typical Multiplexer or Switches analog multiplexer. A voltage higher than 5.5V should not normally be supplied to the switches. The analog switch ic is of the Dual, Single supply type and is cost-effective. It is recommended to use 4.5V as the lowest voltage for the electrical part. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 5V. In the case of dual power supplies, you should connect at least 1V. Integrated with an analog IC DIFFERENTIAL MULTIPLEXER. 5V operating voltages are supported by the electronic component. Operating 8 inputs is required. This switch operates within the bandwidth of 185MHz. The Drain to Source resistance of this electronic component is 130mOhm. It conducts in a 4-bit manner.