BD5228G-TR Overview
There are 5 terminals on this power management that allow it to be mounted. There is a Tape & Reel (TR)-packaging method applied to IC management. Please find attached 1 functions for your reference in this IC power. This power managment ic consists of 1 channels, each of which can be used independently. For your reference, this PMIC includes a list of SC-74A, SOT-753 functions. There are a lot of similarities between this IC power and other Voltage Detector products. IC management conducts at a voltage of 1.2V. Power management conducts at a voltage of 1. Surface Mount mounts power management on the wall. In total, IC powers are 5 pins on the board. Pin count of the power management is 5. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 950mV, which is the minimum supply voltage that should be applied. There should be no more than 10V volts of supply voltage (Vsup) in this power management. Surface Mount is the recommended mounting type. The temperature of the supervisors should be set to this range: -40°C~105°C TA. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. The supervisor's supply current is specified to 950nA. If you want to search for similar IC managements of this manufacturer, you can always refer to BD52, which is the base power ics number. It is one of the well-known BD52xx series power ic line.
BD5228G-TR Features
Voltage Detector type
Minimum supply voltage of 950mV
950nA operating supply current
BD5228G-TR Applications
There are a lot of ROHM Semiconductor BD5228G-TR Voltage Supervisors applications.
- Radar
- Computer applications
- Power distribution systems of operating room
- Automotive power systems
- Low voltage/high power - AI, GPU
- Urban rail transit weak current power monitoring
- emergency room
- Leakage current detection
- Stable power system
- Network equipment
