BD5327FVE-TR Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 5 in total. This power ic is packaged in a way that looks like a Tape & Reel (TR). Power management is possible to find a series of 1 functions. Power management consists of 1 channels, each of which can be used independently. In this PMIC, you can find SOT-665 functions for your reference. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. When 1.2V is applied to the power ic, it conducts. IC management is possible to find a succession of 1 voltages that have been checked. Power management is included in the Surface Mount mount. Power management has a total of 5 pins. 5 pins are present on the power management system. It is recommended that Vsup should not be less than 1.2V for this IC power. In this PMIC, the maximum supply voltage (Vsup) should not exceed 10V volts. The recommended mounting type for IC management is Surface Mount. The temperature of the supervisors should be set to this range: -40°C~105°C TA. Power management has an output of Push-Pull, Totem Pole during operation. For this power management, there is an 950nA volt supply current. It is always advisable to use BD53, the base supervisor number, when searching for similar PMICs from the manufacturer.
BD5327FVE-TR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
950nA operating supply current
BD5327FVE-TR Applications
There are a lot of ROHM Semiconductor BD5327FVE-TR Voltage Supervisors applications.
- Telecommunications equipment
- Consumer electronics
- Low voltage/high power - AI, GPU
- Magnetic resonance imaging
- Important electronics for automotive safety
- Military communications
- Battery-powered equipment
- Detection of phase loss
- Household appliances
- Military electronics
