BD4827FVE-TR Overview
There are 5 terminals on this power management that allow it to be mounted. Power management is packaged in a Tape & Reel (TR) way. In this PMIC, you can find 1 functions for your reference. There are a total of 1 channels on this supervisor, and they are arranged in a series. Please find attached SOT-665 functions for your reference in this IC power. This IC power shares lots of benefits with other Voltage Detector products. There is a voltage supply of 2.5V for the PMIC chip, and the chip conducts at that voltage. Power ics operate at 1 supply voltages. The mount is provided by Surface Mount. There is a subcategory of this power ic known as Power Management Circuits. In total, IC powers are 5 pins on the board. Power managment ic pin count is 5. There should be a minimum voltage supply (Vsup) of 1.2V for this PMIC. In this PMIC, the maximum supply voltage (Vsup) should not exceed 10V volts. Power management recommends the Surface Mount mounting type. This range of temperature should be set for the supervisors: -40°C~105°C TA. While in operation, this supervisor has a voltage output of Open Drain or Open Collector. There is a supply current of 900nA for the power management. You can always use BD48, the base supervisor number, to search for similar PMICs of the manufacturer. This power management requires 2.7V power to work. A maximum supply temperature of 1.53μA can be used with this power management. The IC power that you are looking at comes from our well-known BD48xxx series product line.
BD4827FVE-TR Features
Voltage Detector type
Minimum supply voltage of 1.2V
900nA operating supply current
BD4827FVE-TR Applications
There are a lot of ROHM Semiconductor BD4827FVE-TR Voltage Supervisors applications.
- Automotive power systems
- Analog circuit
- Consumer electronics
- Cloud computing
- Kitchen appliances
- Medical-specific insulation monitor
- Stable power system
- Low voltage/high power - AI, GPU
- Solar power charger
- Telecommunications equipment
