CAT810MTBI-T3 Overview
As you can see, this power management is mounted through 3 terminals. In terms of packaging, power management follows the Tape & Reel (TR) model. Please find attached 1 functions for your reference in this IC power. A series of 1 channels can be found on this supervisor. In this IC management you will find TO-236-3, SC-59, SOT-23-3 functions for you to refer to. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. There is a voltage supply of 5V for the PMIC chip, and the chip conducts at that voltage. When 1 is applied to the power ic, it conducts. Using Surface Mount, IC management is mounted. It is possible to subcategorize this power ic as a Power Management Circuits chip. There are a total of 3 pins on power management. 3 pins make up the power management. IC management can only work with a supply voltage of 1.2V volts. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. Power management' mounting is recommended to be done with the Surface Mount type of mounting. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. Power management has an output of Push-Pull, Totem Pole during operation. The supply current of the power management is 8μA. You can always use CAT810, the base supervisor number, to search for similar PMICs of the manufacturer. To operate this power management, you will need at least 5V volts of power.
CAT810MTBI-T3 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
8μA operating supply current
CAT810MTBI-T3 Applications
There are a lot of ON Semiconductor CAT810MTBI-T3 Voltage Supervisors applications.
- Personal computers
- Precision measurement
- Solar power charger
- Medical-specific isolation transformer
- Electric heating appliances
- Detection of phase loss
- Power distribution systems of operating room
- Radar
- DVR
- Linux and server computing
