BD4727G-TR Overview
There are 5 terminals on this power management that allow it to be mounted. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. In this PMIC, you can find 1 functions for your reference. A series of 1 channels can be found on this supervisor. IC management is packaged as a SC-74A, SOT-753 package. There are a lot of similarities between this IC power and other Voltage Detector products. In a 2.596V supply voltage, the power management conducts. During operation, the power ic is supplied with a voltage of 1. The mount is attached to Surface Mount. It is possible to subcategorize this power ic as a Power Management Circuits chip. In total, IC powers are 5 pins on the board. The pins of the power management system count 5. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 650mV, which is the minimum supply voltage that should be applied. There should be no more than 10V volts of maximum supply voltage (Vsup) in this power management. The recommended mounting type is Surface Mount. The temperature of the supervisors should be set to this range: -40°C~75°C TA. As this power managment ic operates, it is able to produce an output voltage of Open Drain or Open Collector. A similar IC managements number of the manufacturer can always be found by using BD47, the base power ics number. Voltage supervisor can work with a supply temperature of 3μA at the most. It is one of the well-known BD47xx series power ic line.
BD4727G-TR Features
Voltage Detector type
Minimum supply voltage of 650mV
BD4727G-TR Applications
There are a lot of ROHM Semiconductor BD4727G-TR Voltage Supervisors applications.
- Refrigeration
- DSP
- Insulation fault location system
- Consumer electronics
- Digitally controlled LDO regulators circuit
- Battery-powered equipment
- Kitchen appliances
- Detection of phase sequence
- Radio
- Functional modules
