MCP120-300GI/TO Overview
A total of 3 terminals are used to mount this power management. It is packaged with Bulk. Please find attached 1 functions for your reference in this IC power. There are 1 channels on this power managment ic that can be found in a series. Please find attached TO-226-3, TO-92-3 (TO-226AA) functions for your reference in this IC power. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. The supervisor is always powered by a 5V volt supply. During operation, the power ic is supplied with a voltage of 1. By Through Hole, IC management has been mounted. There is a subcategory called Power Management Circuits for this power management. A total of 3 pins are located on this power management. The pins of the power management system count 3. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1V volts. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. In this case, Through Hole is the recommended mounting type. You should set the supervisor's temperature during -40°C~85°C TA . As this power managment ic operates, it is able to produce an output voltage of Open Drain or Open Collector. There is a 60μA supply current present in the power management. It is always advisable to use MCP120, the base supervisor number, when searching for similar PMICs from the manufacturer. At the most, voltage supervisor can work with a supply temperature of 60μA.
MCP120-300GI/TO Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current
MCP120-300GI/TO Applications
There are a lot of Microchip Technology MCP120-300GI/TO Voltage Supervisors applications.
- Personal computers
- Stable power system
- Consumer electronics
- Leakage current detection
- Set top box
- Analog circuit
- Leakage protection
- DVR
- Electric heating appliances
- Battery cars
