SN74S374N Overview
The package is in the form of 20-DIP (0.300, 7.62mm). D flip flop is included in the Tubepackage. Currently, the output is configured to use Tri-State, Non-Inverted. The trigger configured with it uses Positive Edge. This electronic part is mounted in the way of Through Hole. A voltage of 4.75V~5.25Vis required for its operation. In the operating environment, the temperature is 0°C~70°C TA. Logic flip flops of this type are classified as D-Type. It is a type of FPGA belonging to the 74S series. You should not exceed 100MHzin the output frequency of the device. The list contains 1 elements. It consumes 110mA of quiescent current without being affected by external factors.
SN74S374N Features
Tube package
74S series
SN74S374N Applications
There are a lot of Rochester Electronics, LLC SN74S374N Flip Flops applications.
- Synchronous counter
- Automotive
- Event Detectors
- Clock pulse
- Consumer
- Buffer registers
- Balanced Propagation Delays
- Common Clocks
- Cold spare funcion
- Bounce elimination switch
