SN74AS4374BN Overview
20-DIP (0.300, 7.62mm)is the packaging method. D flip flop is included in the Tubepackage. T flip flop is configured with an output of Tri-State, Non-Inverted. This trigger is configured to use Positive Edge. There is an electronic component mounted in the way of Through Hole. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. It is operating at a temperature of 0°C~70°C TA. This electronic flip flop is of type D-Type. This type of FPGA is a part of the 74AS series. A frequency of 125MHzshould not be exceeded by its output. The list contains 1 elements. There is 150mA quiescent consumption. A total of 20terminations have been recorded. The power supply voltage is 5V. ASis the family of this D flip flop. Vsup reaches 5.5V, the maximal supply voltage. Keeping the supply voltage (Vsup) above 4.5V is necessary for normal operation. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. DUAL-RANK FLIP-FLOPis also one of its characteristics.
SN74AS4374BN Features
Tube package
74AS series
SN74AS4374BN Applications
There are a lot of Rochester Electronics, LLC SN74AS4374BN Flip Flops applications.
- Control circuits
- Buffered Clock
- Load Control
- Differential Individual
- Balanced Propagation Delays
- Count Modes
- Matched Rise and Fall
- Data transfer
- CMOS Process
- Common Clocks
