SN74HCT377N Overview
The flip flop is packaged in 20-DIP (0.300, 7.62mm). A package named Tubeincludes it. T flip flop is configured with an output of Non-Inverted. It is configured with a trigger that uses a value of Positive Edge. There is an electric part mounted in the way of Through Hole. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. The operating temperature is -40°C~85°C TA. Logic flip flops of this type are classified as D-Type. The FPGA belongs to the 74HCT series. In order for it to function properly, its output frequency should not exceed 37MHz. The element count is 1 . During its operation, it consumes 8μA quiescent energy. Terminations are 20. D latch belongs to the 74HCT377 family. Power is provided by a 5V supply. There is 3pF input capacitance for this T flip flop. Devices in the HCTfamily are electronic devices. The electronic part is mounted in the way of Through Hole. A total of 20pins are provided on this board. A Positive Edgeclock edge trigger is used in this device. This device has the base part number FF/Latches. The flip flop is designed with 8bits. A total of 5V power supplies are needed to run it. If high efficiency is desired, the supply voltage should be kept at 5V. It offers maximum design flexibility with its output current of 4mA. As of now, there are 3input lines. As an additional reference, you may refer to electronic flip flop WITH HOLD MODE. 8is the number of channels.
SN74HCT377N Features
Tube package
74HCT series
20 pins
8 Bits
5V power supplies
SN74HCT377N Applications
There are a lot of Texas Instruments SN74HCT377N Flip Flops applications.
- Patented noise
- Load Control
- Asynchronous counter
- Automotive
- Dynamic threshold performance
- Supports Live Insertion
- Digital electronics systems
- Cold spare funcion
- Parallel data storage
- Modulo – n – counter
