MC10E452FNR2 Overview
The package is in the form of 28-LCC (J-Lead). It is contained within the Tape & Reel (TR)package. It is configured with Differentialas an output. There is a trigger configured with Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. A supply voltage of -4.2V~-5.7V is required for operation. It is operating at a temperature of 0°C~85°C TA. In terms of FPGAs, it belongs to the 10E series. You should not exceed 1.1GHzin the output frequency of the device. The element count is 1 . A total of 28 terminations have been made. The D flip flop is powered by a voltage of 5V . An electronic device belonging to the family 10Ecan be found here. Normally, the supply voltage (Vsup) should be above 4.2V. In this case, it uses a D FLIP-FLOP logic IC.
MC10E452FNR2 Features
Tape & Reel (TR) package
10E series
MC10E452FNR2 Applications
There are a lot of Rochester Electronics, LLC MC10E452FNR2 Flip Flops applications.
- Shift Registers
- Cold spare funcion
- Guaranteed simultaneous switching noise level
- Dynamic threshold performance
- Clock pulse
- Communications
- Memory
- Parallel data storage
- Memory
- Frequency Dividers
